View Single Post
  #1 (permalink)  
Old 10-17-2005, 06:30 PM
ajrsmom's Avatar
ajrsmom ajrsmom is offline
Nine Year Member
FamilyCorner Postaholic
 
Join Date: Feb 2002
Location: Originally from the Home of the only 6 times Super Bowl Champs!
Posts: 11,872
chuckle Clay Pot Scarecrow

As printed from FamilyCorner.com



Clay Pot Scarecrow
Design by Rita Fleehart



Clay pots are probably one of the most versatile mediums for crafts. This adorable little scarecrow proves that statement without a doubt! This is an absolutely charming Fall craft that looks great in your kitchen, dining room, or even on the porch!

You will need:

3 1/2" clay pot
Acrylic paint: White, Brite Red, Liberty Blue, Midnight Blue
Brushes: #8 flat and #2 long liner
Strip of thin denim fabric: 9 1/2" x 2"
Strip of red checked fabric: 7 1/2" x 2"
1" button
Jute twine: about 3 yards
Raffia: about 100 pieces, 2" long
Polyfil: fist size piece
Ultimate Craft marker: Black, fine
Pink chalk, rouge, or lipstick to rosy cheeks
Glue gun and glue sticks
Osnaberg fabric (or use muslin) - 10" circle, cut with pinking shears if possible

Use any size clay pot and adjust accordingly!

Click here to print the pattern. Resize on your printer to fit your project.

What you do:

Paint pot white, 2 coats; let dry between coats. Paint flared part of pot and about half way up with Liberty Blue. May need second coat of blue. Paint red checks over the white that remains, to match fabric. Also paint a small bib and straps over shoulders with blue. When dry, add details of overalls with Midnight Blue.

Lay strips of fabric in front of you and glue several pieces of 2 raffia on each end of each piece. Then roll each into a tube and glue edges. Cut small pieces of jute and tie a piece close to each end.

Take about a one yard piece of jute and tie the center of it around the center of the denim piece to form legs. Tie a knot in the jute about an inch up from the legs and string the ends through the button, then through the hole in the pot from the inside. Tie around the center of the arm piece. Poke a hole in the center of the fabric circle and push the ends of the jute up through it. Now wrap the handful of Polyfil around the jute just below the fabric. Wrap the fabric down over the Polyfil, and tie another piece of jute around to form a ball. Pull edges out about an inch from the jute. Push head down to rest on top of the pot. You may want to put a bit of glue on just to hold in place. Adjust the gathers in the ball so the face part is mostly flat.

Mark the face on with the Ultimate Marker. Add blush to the cheeks; glue bits of raffia on for hair. These pieces should radiate out from where the jute hanger comes out. Trim hair to suit you, and ENJOY! About the Author
Project idea courtesy of Ben Franklin Crafts & Frames

Attached Images
 
__________________


**
Visit my blogs **

Tami's Kitchen Table Talk

Simple, easy-to-cook family recipes
and lots of good conversation!

Join the Cookie Carnival!
On Hiatus

If you love baking cookies, join our group!





Reply With Quote