Homemade Light Switch Plates

Homemade light switch plates are simple and fun
to make. Pick out fabric for the plate then cut to
size, leaving about 1-2 inches of excess on each
side. Cut the corners in on an angle, then use hot
glue around the perimeter of the back side of the
plate. Carefully, fold the fabric onto the plate,
letting sit for a few moments to dry. Just screw
back in place for an inexpensive designer look.

Tips courtesy of FamilyCorner.com Magazine -- http://familycorner.com

May be printed for personal and educational purposes only.
Copyright © 2005, FamilyCorner.com Magazine, Inc. All Rights Reserved

Click to return to the tip